Skip to main content
Travertin Curaçao – home
Menu
Request a price on WhatsApp (opens in a new window)
Silver splitface strips: silver-grey travertine strips with a rough cleft face, stacked as a wall
  • Silver splitface strips: close-up of silver-grey splitface strips
  • Exterior wall of a villa clad in silver-grey travertine splitface strips, lit in the evening
On order

Silver

Silver splitface stripstravertine on Curaçao

Request a price on WhatsApp — Silver splitface strips (opens in a new window)

Personal reply on WhatsApp. Mention the number of m² for a quick quote.

Silver-grey travertine strips with a natural cleft face. Splitface gives a wall relief and shadow play: facade, garden wall, fireplace or the wall behind the bar.

Silver splitface strips consists of strips with a natural cleft face, stacked in a running bond, usually without a visible joint. The relief catches the light and gives a facade, garden wall, outdoor kitchen, fireplace or TV wall depth.

Installation: glue onto a flat, stable wall with a flexible natural stone adhesive (an exterior adhesive outdoors). Start at the bottom with a level course, stagger the joints and work upwards. Corners are mitred or made with corner pieces. Allow 10% cutting waste.

Care: seal after installation; repeat yearly outdoors. Rinse off dust and salt deposits with water; remove algae on shaded sides with a natural stone cleaner and a soft brush.

On order — allow a lead time of 8 to 12 weeks.

Book a showroom visit on WhatsApp (opens in a new window)

Specifications

Specifications of Silver splitface strips
SeriesSilver
TypeSplitface strips
MaterialTravertine
ColorSilver / grey
FinishSplitface (natural cleft)
Sizes2.1 × 10 cm × free length · 2.1 × 15 cm × free length · 2.1 × 7.5 cm × free length
Thickness1.5 – 2.1 cm
ApplicationWall
AvailabilityOn order, lead time 8 to 12 weeks
PriceOn request via WhatsApp

Frequently asked questions about Silver splitface strips

Can Silver splitface strips be used outdoors?

Yes. Splitface strips withstand sun, rain and sea air. Use a flexible exterior adhesive and seal the wall after installation; repeat yearly outdoors.

How is Silver splitface strips installed?

Strips of free length are glued in a running bond onto a flat, stable wall, usually without a joint. Start at the bottom with a level course; corners are mitred or made with corner pieces. Allow 10% cutting waste.

How much Silver splitface strips do I need?

Measure height × width of the wall, subtract windows and doors and add 10%. Send the measurements via WhatsApp for the square metres and crates, and a price.

Related products