Skip to main content
Travertin Curaçao – home
Menu
Request a price on WhatsApp (opens in a new window)
Light splitface strips: light travertine strips with cleft face in a crate
  • Light splitface strips: light free-length splitface strips on a pallet
  • Light living room with a feature wall of light travertine splitface strips behind a wood stove
On order

Light

Light splitface stripstravertine on Curaçao

Request a price on WhatsApp — Light splitface strips (opens in a new window)

Personal reply on WhatsApp. Mention the number of m² for a quick quote.

Light-beige travertine strips with a cleft face. Light in colour, so usable in smaller spaces too without becoming heavy. In free length or as small 5 × 15 cm strips.

Light splitface strips consists of strips with a natural cleft face, stacked in a running bond, usually without a visible joint. The relief catches the light and gives a facade, garden wall, outdoor kitchen, fireplace or TV wall depth.

Installation: glue onto a flat, stable wall with a flexible natural stone adhesive (an exterior adhesive outdoors). Start at the bottom with a level course, stagger the joints and work upwards. Corners are mitred or made with corner pieces. Allow 10% cutting waste.

Care: seal after installation; repeat yearly outdoors. Rinse off dust and salt deposits with water; remove algae on shaded sides with a natural stone cleaner and a soft brush.

On order — allow a lead time of 8 to 12 weeks.

Book a showroom visit on WhatsApp (opens in a new window)

Specifications

Specifications of Light splitface strips
SeriesLight
TypeSplitface strips
MaterialTravertine
ColorLight
FinishSplitface (natural cleft)
Sizes2.1 × 10 cm × free length · 2.1 × 15 cm × free length · 1.5 × 5 × 15 cm
Thickness1.5 – 2.1 cm
ApplicationWall
AvailabilityOn order, lead time 8 to 12 weeks
PriceOn request via WhatsApp

Frequently asked questions about Light splitface strips

Can Light splitface strips be used outdoors?

Yes. Splitface strips withstand sun, rain and sea air. Use a flexible exterior adhesive and seal the wall after installation; repeat yearly outdoors.

How is Light splitface strips installed?

Strips of free length are glued in a running bond onto a flat, stable wall, usually without a joint. Start at the bottom with a level course; corners are mitred or made with corner pieces. Allow 10% cutting waste.

How much Light splitface strips do I need?

Measure height × width of the wall, subtract windows and doors and add 10%. Send the measurements via WhatsApp for the square metres and crates, and a price.

Related products